SAMSUNG

Samsung SGH-600


To display IMEI type *06#

1. Software Version : *#9999# and *#0837#
(instructions)
2. Serial Port Info : *#0001#
3. Batt./Temp. Meter : *#0228#
4. Sim Card Info : *#0778#
5. SIM capacity display: *#0746#
6. Memory error : *#0377# Use side keys to
select values. Cancel and ok.
7. Error Message : *#0785#. If ok is pressed
the phone will reset and
register this on the memory error.
8. Alarm Tone Adjust : *#0289#
9. Date/Time Log : *#0786# Last up and down.
10. Memory Info : *#0246#
11. LCD Contrast : *#0523# Only with version
G60RL01W. 
12. Network Monitor : *#0324#
13. Memory Usage : *#0636#
14. Trace Watcdog : *#0427# 
15. Buzzer adjust : *#0289#
16. Phone Parameter : *#0862# Normal, Earphone or
carkit can be
selected.
17. Avtivate light & Vibra : *#7698# Flash the
screenligth during 10 seconds,
the activation of vibration system.
18. Activate smiley. : *#9125# Activates the
smiley when charging.


Unidentified Code:

*#0872# Diag? Parameter can be changed with sidekeys.
*#0544#: Jig detect ?
*#0364# Watchdog ?

NB! Since version G60RL23M , it seem that only *#06# , *#0001#
e *#9999#, works. 

Pin-Out 1- GND 2- RS232 TXD 3- RS232 RXD 4- RS232 RTS 5- MAX 4.2 IN ??? 6- GND 7- GND 8- SPK - OUT 9- SPK + OUT 10- SCL I2C comm proprietary bus 11- SDA I2C comm proprietary bus 12- RS232 CTS 13- VCC 5V OUT 14- DC 9V IN 15- DC 9V IN 16- MIC + IN 17- MIC - IN 18- +3.6V IN battery 19- GND 20- Antenna 21- Antenna 22- GND 23- GND 24- n.c. 25- Temperature sensor IN 26- +3.6V IN battery 27- GND 28- GND

SP-unlock SGH-600

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
*2767*2878# -> Custom EEPROM Reset

These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600